Bypass local mode is a workstation specific setting. This means each workstation will need to have the change applied individually by performing the following steps. Alternately, if you are interesting in “test driving” bypass local on a few select workstations, you are free to do so by enabling the change on select workstations only.
1. Start toxiCALL® and log in with supervisor or configuration manager rights.
2. Select “Tools” then “Configuration…”
3. Select the “More” button to the right of the configuration window to access the workstation specific settings.
4. Locate the “Bypass Local” setting and update the selection to “Yes”. You will also notice “Get Network Case Number” will update to “Yes”. This is normal and expected.
If you would like visual aids locating this setting, please refer to the workstation configuration documentation linked below.